Nuaire Drimaster Eco Hall Controlled – Condensation Solving Loft Unit
The DRI-ECO-HC enhances Nuaire’s PIV technology with the added benefit of having the system controls located in the contemporary ceiling diffuser. This unique feature bestows the homeowner with complete control of the unit, without having to enter the loft space.
Not only can settings be altered with the push of a button on the contemporary diffuser, but there is also a 7 segment display which notifies the user of the need for filter change and what setting the Drimaster is running on.
The DRIMASTER-ECO range provides whole home ventilation using the Positive Input Ventilation principle, which introduces fresh filtered air into the dwelling at a continuous rate, encouraging movement of air from inside to outside.
A large range of models are available – Please see our table below. Please note, it is not possible to retro-fit a heater to other Drimaster Eco models.
Running costs between 5 and 10p per day dependent on electrical supplier and heating and speed setting.
NUAIRE INVENTED PIV OVER 40 YEARS AGO
It has become the UK’s most popular alternative method of low energy, cost-effective ventilation!
Invented by Nuaire and installed in thousands of dwellings each year, PIV can be a more cost-effective and simple to install ventilation solution, whilst still meeting building regulations.
CREATES A HEALTHY LIVING ENVIRONMENT
MOISTURE AND CONDENSATION ARE DRIVEN OUT
The filtered air gently pressurises the home from inside out, forcing out the stale air.
NO NEED TO OPEN WINDOWS TO VENTILATE
Clean, fresh air is continuously drawn in through the lofts natural leakage points, passed through the filters and fed into the property via a central hallway diffuser.
Always get a qualified electrician for fitting the unit!
The unit is supplied with a pre-wired power supply. This power supply unit has a metal bracket incorporating fixing holes, which should be used to fit the power supply to a suitable surface, e.g. a wooden joist.
The fan unit is also supplied with a fused spur. The 3 core mains cable from the power supply should be connected to a fixed wiring installation, via the isolator, via the spur, in accordance with current IEE wiring regulations.
7 YEAR WARRANTY!